High Speed Machining (HSM) Seminar and PPT with PDF Report: Hard Milling – Chatter: Chatter is the #2 cause of tool collapse in hard milling applications, Process for avoiding chatter.

Also See: Active Magnetic Bearings (AMB) Seminar with PDF Report

High Speed Machining (HSM) Seminar Report and PPT

NX Milling – what can you do?

  • Avoid over-loading the tool while maintaining high feed rates
  • Controlling tool step-over, managing tool embedding
    • Z-level plus path
    • Enhanced trochoidal paths
  • Sysmatic locate the optimum machining areas
  • Use the in-process workpiece

Material Removal Rate – Roughing

  • Typical delineating path exceeds requested metal removal rate at corners and entirely embedded first cuts.

MRR & Z Level Operations

  • Easy control of vertical and horizontal espousal angles.
  • Z-lock gives much better Super-GI stage at the controller.

Cleaner Toolpath

  • Too many engages and retracts should be avoided because they are unsafe.
  • Level based Rest Milling is faster too.

Constant Surface Speed ?

  • Varying RPM as the effective cutting diameter changes.
  • Constant Surface Speed is important for good surface finish.
  • Chatter features could be disregard since the depth of cut is really compact.

Tool Length

  • Retain the tool length as short as possible.
  • Increased tool length causes increased deflection.
  • Even in big tools this makes a difference.
  • Even if there is unimportant un-measurable deflection, you require only a compact disturbance to start vibration. (which is very bad for the coating.)

Content of the Seminar and pdf report for High Speed Machining (HSM)

  • Introduction and Background
  • HSM / Hard Milling
  • Components of HSM
  • HSM aspects outside your CAM system
  • HSM aspects inside your CAM system
  • References

Here we are giving you High Speed Machining (HSM) Seminar and PPT with PDF report. All you need to do is just click on the download link and get it.

High Speed Machining (HSM) PPT and Seminar Free Download

High Speed Machining (HSM) pdf Report Free Download

It was all about High Speed Machining (HSM) Seminar and PPT with pdf report. If you liked it then please share it or if you want to ask anything then please hit comment button.

Sumit ThakurMechanicalHigh Speed Machining (HSM) Seminar and PPT with PDF Report: Hard Milling – Chatter: Chatter is the #2 cause of tool collapse in hard milling applications, Process for avoiding chatter.Also See: Active Magnetic Bearings (AMB) Seminar with PDF Report High Speed Machining (HSM) Seminar Report and PPT NX Milling –...