Casting Defects PPT: Definition, Types, Remedies and Causes Free Download: It is an unwelcome anomaly that develops in the casting during the metal casting process. The cast metal flaws are caused by a number of different factors or sources. We will cover all the main categories of casting faults in this article. Some of the flaws created may be disregarded or ignored, while others are unacceptable and must be removed for the parts to perform better.

Casting Defects PPT: Definition, Types, Remedies and Causes

Gas porosity: Blowholes, open holes, and pinholes

Defects due to shrinkage: shrinkage cavity

Defects in the mold material, including rat tails, swells, drops, and cut-and-washes.

Cold shut, misrun, and slag inclusion in pouring metal

 Hot tears and hot spots are metallurgical flaws.

Table of Content

  • Definition
  • Introduction
  • Types of Casting Defects 
  • Remedies of Casting Defects
  • Causes of Casting Defects  
  • Prevention of Casting Defects 
  • Conclusion

Casting Defects PPT: Definition, Types, Remedies and Causes

Sumit ThakurUncategorizedCasting Defects PPT: Definition, Types, Remedies and Causes Free Download: It is an unwelcome anomaly that develops in the casting during the metal casting process. The cast metal flaws are caused by a number of different factors or sources. We will cover all the main categories of casting faults...Seminar Topics