Network Topology Seminar PDF Report and PPT: Network Topology can be defined as a logical arrangement of the computer networking devices. It illustrates the way different nodes are placed and linked with each other. A link is formed by connecting two or more devices, whereas a topology is formed by connecting two or more links. The data paths that can be used between any pair of network devices are determined by the topology. We have discussed here Network Topology Seminar, PDF Report and PPT.

Also See: 5G Technology PPT And PDF Seminar Report

Network Topology Seminar, PDF Report and PPT

Factors

The major factors that are considered while selecting a network topology are written below:

  1. Reliability
  2. Ease of installation
  3. Ease of troubleshooting
  4. Price
  5. Scalability
  6. Bandwidth Capacity
  7. Delay in routing the information from one node to another.

Types of Network Topology

Network Topology is basically divided into five basic types mentioned below:

  1. Star Topology

A topology in which all the components in the network connects with the central device is known as the star topology. The central device can be a switch, a router or a hub. All the workstations are connected with a point to point connection to the central device. Prior to reaching the intended location, all the data passes through the central device on the star topology.

It is also known by the name of the star network among the people.

  1. Bus Topology

In a bus topology, all the nodes and devices are connected to the same transmission line in a sequential way. It is a simple and low-cost topology, but there can be a risk if its single point gets failed. The major advantage of using a bus topology is that it needs a shorter cable as compared to other topologies.

  1. Ring Topology

Ring Topology can be defined as that topology in which all the devices connect indirectly through interface device or directly to the ring. The different nodes are connected in the form of a circle and a ring in this type of network topology.

  1. Mesh Topology

In a mesh topology, every node is directly connected to all the nodes that present in the network. It results in the network to become less prone to faults. However, its high cost limits it to only to highly critical networks. The messages can be relayed in the mesh networks by using either a routing technique or a flooding technique.

  1. Tree Topology

A tree network topology can be defined as a combination of two or more star networks connected to each other. It can be called as an extension to the star and bus topologies. It is the best option where the star and bus networks can’t get implemented because of the scalability issues.

Also See: Pill Camera Seminar and PPT with PDF Report

Tips While Selecting a Topology

  • Always think about your budget. The least expensive method to install a network is a linear bus network because you don’t need to buy concentrators.
  • Keep cable’s length into consideration. There is a need for shorter length cables for a linear bus network.
  • While selecting the type of cable, think twice. The unshielded twisted pair is one of the most common types in schools and it is often used along with the star networks.

Content of the Seminar and PDF Report for Network Topology

  • Objectives
  • Simple Physical Topologies
  • Bus
  • Ring
  • Star
  • Hybrid Physical Topologies
  • Logical Topologies
  • Conclusion
  • References

Here we are giving you Network Topology Seminar and PPT with PDF report. All you need to do is just click on the download link and get it.

Network Topology PPT and Seminar Free Download

Network Topology pdf Report Free Download

It was all about Network Topology Seminar and PPT with pdf report. If you liked it then please share it or if you want to ask anything then please hit comment button.

Share This With Your Friends